What is an ITP in construction?

An Inspection and Test Plan (ITP) is a quality assurance document used in construction to define inspection activities, hold points, and witness points at key stages of work. It specifies what needs to be checked, by whom, and records the results for audit and compliance purposes.

How much does HoldPoint QA cost?

HoldPoint QA charges $45 AUD per active project per month. There are no per-seat fees or per-document charges. Projects start as draft (free) until the first document is added.

Can external clients sign ITPs without an account?

Yes. HoldPoint QA sends a secure sign-off link via email. External signatories (clients, principal's representatives, or engineers), can review the full ITP checklist and sign digitally without needing an account or app.

Does HoldPoint generate ITP PDFs automatically?

Yes. When an ITP is approved, HoldPoint automatically generates a branded PDF containing all checklist results, inspection notes, photos, and signatures. PDFs are regenerated if any information changes.

Do I need an ITP for solar pv installation work in Australia?

If your contract, principal contractor, or client QA manual calls for an Inspection and Test Plan, you need one, whether or not your scope is "construction" in the everyday sense. On commercial and government projects, solar pv installation work is typically assessed against AS/NZS 5033 (PV array installation, AS/NZS 4777) Grid connection and CEC guidelines, and the ITP is how you show each requirement was actually verified.

What hold points should a Solar PV Installation ITP include?

At minimum: roof penetration waterproofing inspection, DC insulation test before energise and grid connection verification. Hold points belong wherever a defect would be concealed by following work or expensive to put right, so work stops until the nominated party signs. Your specification or the principal's QA plan may add more.

Which standards apply to solar pv installation inspections?

The references most solar pv installation ITPs cite are AS/NZS 5033 (PV array installation, AS/NZS 4777) Grid connection and CEC guidelines. Always check the project specification as well, it frequently calls up extra requirements, or a specific edition, on top of the standard.

Can I use an AI-generated solar pv installation ITP on a real project?

Yes, as a starting point. Generate the solar pv installation ITP for your scope, then review it against your contract and specification, especially the hold points, like roof penetration waterproofing inspection. Run it through HoldPoint for digital sign-offs, photos, and branded PDFs, and have your QA manager or superintendent approve the final version before it goes to site.

Infrastructure & energy

AI-powered · Free to try · Save your ITP

Free Solar PV Installation ITP Generator

Generate a complete Inspection and Test Plan for solar pv installation work in seconds. Mounting, DC wiring, inverter commissioning, and grid connection hold points. Hold points and witness points are placed automatically, edit, brand, and sign off when you're ready.

Solar PV Installation-specific hold points and witness points
Aligned with relevant Australian Standards
Sign up free to download your PDF
Save to your workspace and use on every project

Trade

Scope

Brand

Project

Finish

What trade is this ITP for?

We'll build a practical starter checklist for your trade, you can edit anything after.

Used on live Australian projects

Read their stories

Background

What is a Solar PV Installation ITP?

A solar pv installation ITP defines the quality verification steps for infrastructure and energy projects, installation checks, testing, commissioning, and hold points before energisation or acceptance.

The real value of a solar pv installation ITP is the sequence it enforces. Roof penetration waterproofing inspection, DC insulation test before energise and Grid connection verification are set as hold points, so nothing proceeds past them until they've been inspected and signed. Witness points like module layout and fixings, DC cable management, and inverter install tell the superintendent or client when to attend, without holding up the crew if they can't make it.

For solar pv installation scopes the usual references are AS/NZS 5033 (PV array installation, AS/NZS 4777) Grid connection and CEC guidelines. Tie each inspection back to the relevant requirement and capture the sign-off with a timestamp and photos, and you have evidence that survives an audit, which an unsigned Word template emailed after the fact does not.

Quality checkpoints

Solar PV Installation ITP Hold Points & Witness Points

The AI generator automatically includes these checkpoints based on your scope description. Hold points require mandatory sign-off before work proceeds; witness points notify the relevant party but don't stop work.

Hold Points

Work stops until signed off

Roof penetration waterproofing inspection
DC insulation test before energise
Grid connection verification

Witness Points

Party notified, work can continue

Module layout and fixings
DC cable management
Inverter install
Monitoring commissioning

Applicable Australian Standards

AS/NZS 5033 (PV array installation
AS/NZS 4777) Grid connection
CEC guidelines

Audit-grade evidence

GPS & weather captured at every solar pv installation sign-off.

Generating a solar pv installation ITP gets you a checklist. Defending it years later in a defect claim is a different problem. HoldPoint records the inspector's GPS coordinates and the live weather (temperature, humidity, wind, and sky condition), at the moment they sign each hold point. The data prints on the final PDF under the signature.

Temperature on record

Pour temp, ambient, and curing window, automatically logged.

Humidity & wind

Critical for paint, coating, and curing claims under AS standards.

Lat / lng + map link

Proof the inspector was actually on site, not signing from the office.

Available on every paid HoldPoint plan. The free generator gives you the ITP: HoldPoint gives you the defensible record.

Common questions

Solar PV Installation ITP: Frequently Asked Questions

Do I need an ITP for solar pv installation work in Australia?: If your contract, principal contractor, or client QA manual calls for an Inspection and Test Plan, you need one, whether or not your scope is "construction" in the everyday sense. On commercial and government projects, solar pv installation work is typically assessed against AS/NZS 5033 (PV array installation, AS/NZS 4777) Grid connection and CEC guidelines, and the ITP is how you show each requirement was actually verified.
What hold points should a Solar PV Installation ITP include?: At minimum: roof penetration waterproofing inspection, DC insulation test before energise and grid connection verification. Hold points belong wherever a defect would be concealed by following work or expensive to put right, so work stops until the nominated party signs. Your specification or the principal's QA plan may add more.
Which standards apply to solar pv installation inspections?: The references most solar pv installation ITPs cite are AS/NZS 5033 (PV array installation, AS/NZS 4777) Grid connection and CEC guidelines. Always check the project specification as well, it frequently calls up extra requirements, or a specific edition, on top of the standard.
Can I use an AI-generated solar pv installation ITP on a real project?: Yes, as a starting point. Generate the solar pv installation ITP for your scope, then review it against your contract and specification, especially the hold points, like roof penetration waterproofing inspection. Run it through HoldPoint for digital sign-offs, photos, and branded PDFs, and have your QA manager or superintendent approve the final version before it goes to site.

Related industries

More Infrastructure & energy ITP Generators

Battery Energy Storage ITP Generator

Generate a free battery energy storage Inspection & Test Plan (ITP) with AI in seconds. BESS install, isolation, testing, and energisation under AS/NZS 5139. Hold points, witness points, and PDF export, built for Australian QA workflows.

Generate

EV Charging Infrastructure ITP Generator

Generate a free ev charging infrastructure Inspection & Test Plan (ITP) with AI in seconds. Chargers, load management, civil works, and electrical commissioning. Hold points, witness points, and PDF export, built for Australian QA workflows.

Generate

Telecommunications Infrastructure ITP Generator

Generate a free telecommunications infrastructure Inspection & Test Plan (ITP) with AI in seconds. Tower works, antenna install, RF safety, and carrier handover. Hold points, witness points, and PDF export, built for Australian QA workflows.

Generate

Street & Public Lighting ITP Generator

Generate a free street & public lighting Inspection & Test Plan (ITP) with AI in seconds. Column install, earthing, lux levels, and authority acceptance. Hold points, witness points, and PDF export, built for Australian QA workflows.

Generate

Water & Wastewater Treatment ITP Generator

Generate a free water & wastewater treatment Inspection & Test Plan (ITP) with AI in seconds. Process equipment, hydro tests, and performance proving. Hold points, witness points, and PDF export, built for Australian QA workflows.

Generate

Wind Energy ITP Generator

Generate a free wind energy Inspection & Test Plan (ITP) with AI in seconds. Foundations, tower erection, electrical, and grid compliance testing. Hold points, witness points, and PDF export, built for Australian QA workflows.

Generate

Browse all 91 industries →

Need to manage ITPs across a live project?

The free generator builds a single ITP. HoldPoint gives you the full workflow, templates, digital sign-offs, photo attachments, audit trails, and automatic PDF generation for every document on every project.

Continue with my ITP in HoldPoint Generate my Solar PV Installation ITP

14 days free. No credit card to start.