What is an ITP in construction?

An Inspection and Test Plan (ITP) is a quality assurance document used in construction to define inspection activities, hold points, and witness points at key stages of work. It specifies what needs to be checked, by whom, and records the results for audit and compliance purposes.

How much does HoldPoint QA cost?

HoldPoint QA charges $45 AUD per active project per month. There are no per-seat fees or per-document charges. Projects start as draft (free) until the first document is added.

Can external clients sign ITPs without an account?

Yes. HoldPoint QA sends a secure sign-off link via email. External signatories (clients, principal's representatives, or engineers), can review the full ITP checklist and sign digitally without needing an account or app.

Does HoldPoint generate ITP PDFs automatically?

Yes. When an ITP is approved, HoldPoint automatically generates a branded PDF containing all checklist results, inspection notes, photos, and signatures. PDFs are regenerated if any information changes.

Do I need an ITP for battery energy storage work in Australia?

If your contract, principal contractor, or client QA manual calls for an Inspection and Test Plan, you need one, whether or not your scope is "construction" in the everyday sense. On commercial and government projects, battery energy storage work is typically assessed against AS/NZS 5139 (Battery system safety and AS/NZS 4777) Grid connection, and the ITP is how you show each requirement was actually verified.

What hold points should a Battery Energy Storage ITP include?

At minimum: battery room fire and ventilation check, pre-energisation tests, and commissioning sign-off. Hold points belong wherever a defect would be concealed by following work or expensive to put right, so work stops until the nominated party signs. Your specification or the principal's QA plan may add more.

Which standards apply to battery energy storage inspections?

The references most battery energy storage ITPs cite are AS/NZS 5139 (Battery system safety and AS/NZS 4777) Grid connection. Always check the project specification as well, it frequently calls up extra requirements, or a specific edition, on top of the standard.

Can I use an AI-generated battery energy storage ITP on a real project?

Yes, as a starting point. Generate the battery energy storage ITP for your scope, then review it against your contract and specification, especially the hold points, like battery room fire and ventilation check. Run it through HoldPoint for digital sign-offs, photos, and branded PDFs, and have your QA manager or superintendent approve the final version before it goes to site.

Infrastructure & energy

AI-powered · Free to try · Save your ITP

Free Battery Energy Storage ITP Generator

Generate a complete Inspection and Test Plan for battery energy storage work in seconds. BESS install, isolation, testing, and energisation under AS/NZS 5139. Hold points and witness points are placed automatically, edit, brand, and sign off when you're ready.

Battery Energy Storage-specific hold points and witness points
Aligned with relevant Australian Standards
Sign up free to download your PDF
Save to your workspace and use on every project

Trade

Scope

Brand

Project

Finish

What trade is this ITP for?

We'll build a practical starter checklist for your trade, you can edit anything after.

Used on live Australian projects

Read their stories

Background

What is a Battery Energy Storage ITP?

A battery energy storage ITP defines the quality verification steps for infrastructure and energy projects, installation checks, testing, commissioning, and hold points before energisation or acceptance.

Most battery energy storage ITPs are built around the moments where work becomes hard or expensive to undo. For this scope that usually means battery room fire and ventilation check, pre-energisation tests, and commissioning sign-off, each one a hold point that pauses the job until it's signed off. Witness points like racking install, protection settings and EMS integration tell the superintendent or client when to attend, without holding up the crew if they can't make it.

Reference standards matter here: AS/NZS 5139 (Battery system safety and AS/NZS 4777) Grid connection are the documents a superintendent or certifier will expect to see cited. A battery energy storage ITP that names the requirement behind each check is much harder to argue with months later.

Quality checkpoints

Battery Energy Storage ITP Hold Points & Witness Points

The AI generator automatically includes these checkpoints based on your scope description. Hold points require mandatory sign-off before work proceeds; witness points notify the relevant party but don't stop work.

Hold Points

Work stops until signed off

Battery room fire and ventilation check
Pre-energisation tests
Commissioning sign-off

Witness Points

Party notified, work can continue

Racking install
Protection settings
EMS integration
Emergency shutdown test

Applicable Australian Standards

AS/NZS 5139 (Battery system safety
AS/NZS 4777) Grid connection

Audit-grade evidence

GPS & weather captured at every battery energy storage sign-off.

Generating a battery energy storage ITP gets you a checklist. Defending it years later in a defect claim is a different problem. HoldPoint records the inspector's GPS coordinates and the live weather (temperature, humidity, wind, and sky condition), at the moment they sign each hold point. The data prints on the final PDF under the signature.

Temperature on record

Pour temp, ambient, and curing window, automatically logged.

Humidity & wind

Critical for paint, coating, and curing claims under AS standards.

Lat / lng + map link

Proof the inspector was actually on site, not signing from the office.

Available on every paid HoldPoint plan. The free generator gives you the ITP: HoldPoint gives you the defensible record.

Common questions

Battery Energy Storage ITP: Frequently Asked Questions

Do I need an ITP for battery energy storage work in Australia?: If your contract, principal contractor, or client QA manual calls for an Inspection and Test Plan, you need one, whether or not your scope is "construction" in the everyday sense. On commercial and government projects, battery energy storage work is typically assessed against AS/NZS 5139 (Battery system safety and AS/NZS 4777) Grid connection, and the ITP is how you show each requirement was actually verified.
What hold points should a Battery Energy Storage ITP include?: At minimum: battery room fire and ventilation check, pre-energisation tests, and commissioning sign-off. Hold points belong wherever a defect would be concealed by following work or expensive to put right, so work stops until the nominated party signs. Your specification or the principal's QA plan may add more.
Which standards apply to battery energy storage inspections?: The references most battery energy storage ITPs cite are AS/NZS 5139 (Battery system safety and AS/NZS 4777) Grid connection. Always check the project specification as well, it frequently calls up extra requirements, or a specific edition, on top of the standard.
Can I use an AI-generated battery energy storage ITP on a real project?: Yes, as a starting point. Generate the battery energy storage ITP for your scope, then review it against your contract and specification, especially the hold points, like battery room fire and ventilation check. Run it through HoldPoint for digital sign-offs, photos, and branded PDFs, and have your QA manager or superintendent approve the final version before it goes to site.

Related industries

More Infrastructure & energy ITP Generators

Solar PV Installation ITP Generator

Generate a free solar pv installation Inspection & Test Plan (ITP) with AI in seconds. Mounting, DC wiring, inverter commissioning, and grid connection hold points. Hold points, witness points, and PDF export, built for Australian QA workflows.

Generate

EV Charging Infrastructure ITP Generator

Generate a free ev charging infrastructure Inspection & Test Plan (ITP) with AI in seconds. Chargers, load management, civil works, and electrical commissioning. Hold points, witness points, and PDF export, built for Australian QA workflows.

Generate

Telecommunications Infrastructure ITP Generator

Generate a free telecommunications infrastructure Inspection & Test Plan (ITP) with AI in seconds. Tower works, antenna install, RF safety, and carrier handover. Hold points, witness points, and PDF export, built for Australian QA workflows.

Generate

Street & Public Lighting ITP Generator

Generate a free street & public lighting Inspection & Test Plan (ITP) with AI in seconds. Column install, earthing, lux levels, and authority acceptance. Hold points, witness points, and PDF export, built for Australian QA workflows.

Generate

Water & Wastewater Treatment ITP Generator

Generate a free water & wastewater treatment Inspection & Test Plan (ITP) with AI in seconds. Process equipment, hydro tests, and performance proving. Hold points, witness points, and PDF export, built for Australian QA workflows.

Generate

Wind Energy ITP Generator

Generate a free wind energy Inspection & Test Plan (ITP) with AI in seconds. Foundations, tower erection, electrical, and grid compliance testing. Hold points, witness points, and PDF export, built for Australian QA workflows.

Generate

Browse all 91 industries →

Need to manage ITPs across a live project?

The free generator builds a single ITP. HoldPoint gives you the full workflow, templates, digital sign-offs, photo attachments, audit trails, and automatic PDF generation for every document on every project.

Continue with my ITP in HoldPoint Generate my Battery Energy Storage ITP

14 days free. No credit card to start.