What is an ITP in construction?

An Inspection and Test Plan (ITP) is a quality assurance document used in construction to define inspection activities, hold points, and witness points at key stages of work. It specifies what needs to be checked, by whom, and records the results for audit and compliance purposes.

How much does HoldPoint QA cost?

HoldPoint QA charges $45 AUD per active project per month for 1–5 projects, and $35 per project per month for 6 or more active projects. There are no per-seat fees or per-document charges. Projects start as draft (free) until the first document is added.

Can external clients sign ITPs without an account?

Yes. HoldPoint QA sends a secure sign-off link via email. External signatories — clients, principal's representatives, or engineers — can review the full ITP checklist and sign digitally without needing an account or app.

Does HoldPoint generate ITP PDFs automatically?

Yes. When an ITP is approved, HoldPoint automatically generates a branded PDF containing all checklist results, inspection notes, photos, and signatures. PDFs are regenerated if any information changes.

All templates

ConcreteCommercial

Formwork System Inspection & Test Plan

ITP for formwork system erection covering design certification, prop loading, shore spacing, alignment verification, safety provisions and striking criteria per AS 3610.

13 checklist items

2 hold points

Use this template — it's free

Checklist Preview

Design & Documentation

Requires sign-off

P/F

Formwork design certified by engineer

Hold

✓

Safe work method statement reviewed

P/F

Formwork materials in serviceable condition

Erection & Alignment

Requires sign-off

P/F

Base plates on adequate bearing surface

P/F

Shore spacing per formwork drawings

Hold

P/F

Props plumb and braced

P/F

Camber provision per engineer specification

P/F

Bearer and joist spacing compliant

P/F

Deck sheets free from damage and gaps

Safety & Striking

Requires sign-off

P/F

Edge protection installed at all open edges

P/F

Safe access provided to all work areas

P/F

Striking criteria defined and documented

Minimum stripping strength requirement (MPa)

Ready to use this template?

Get started free